Home Products About Us Sales Network F.A.Q Contact us Info Center
Home > Info Center > > How to use slings onto a crane hook

Wristrong Catalouge

Wristrong facebook page   Wristrong Linkedin page   Wristrong Google+ Page

How to use slings onto a crane hook
2016-05-11

How to use slings onto a crane hook 

How should you sling a load onto a crane hook?

 

  • Make clear signals according to standard signals. Refer to "Materials Handling - Crane and Hoist Hand Signals" for examples.
  • Signal the crane operator from only the one slinger who is in charge of lift. The only exception is a stop signal. (A slinger or rigger is the person who hooks loads onto cranes using various types of slings.)
  • Determine the weight of the load to be lifted.
  • Select the right sling for each job using the manufacturers' tables. A slinger must be familiar with these tables showing the safe capacities of slings.
  • Inspect each item of lifting equipment before and after lifts.
  • Protect slings from damage by sharp edges with corner saddles, padding, or wooden blocks.
  • Warn all people out of the load area before starting the lift.
  • Protect your hands and fingers: when slack is being taken out of a sling, keep them from between the sling and load so they will not be trapped and crushed. Step away before the lift is made.
  • Make sure a load is high enough to clear all objects before signaling for the crane to move.
  • Walk ahead of the moving load and warn people to keep clear. Use guide ropes to prevent rotation or other uncontrolled motion.
  • Hook unused sling legs to the sling ring.


What should you avoid when slinging a load?

 

  • Do not exceed the capacities of slings, fixtures and cranes.
  • Do not twist or tie knots in slings or use bolts, nails or pieces of wire to shorten slings.
  • Do not splice together broken slings.
  • Do not ride on hooks or loads.
  • Do not allow workers to walk or work under a load.
  • Do not attempt to pull or push loads to a spot that is not under the hoist.
  • Do not drag slings. Avoid pulling slings out from under loads by crane. Set down loads on blocking, never directly on a sling.
  • Do not leave unused slings, accessories, or blocking lying on the floor. Hang on racks or store in a proper place.
  • Do not carry a load by inserting the point of the hook into a link of the chain.
  • Do not hammer a sling into place.
  • Do not leave loose materials on a load.
  • Do not use slings that are stretched, broken, or defective. Tag them as defective and dispose of any damaged slings.
  • Do not leave suspended loads unattended.