Home Products About Us Sales Network F.A.Q Contact us Info Center
Home > Products > Safety Harness & Safety Belt > Full Body Safety Harness >

Wristrong Catalouge

Wristrong facebook page   Wristrong Linkedin page   Wristrong Google+ Page

DX-313 Safety Harness-Fully body safety harness

Material:Aluminum Alloy+Polyester webbing
Safety Factor:N/M
Length:Universal
Color:Yelllow,Orange
Standard: EN361,EN 362,EN 354,EN 355
Characteristic:All hardware are Aluminum alloy,light weighted, easy and fast to handle,economic price with superior quality
Package:Poly bag+Carton,or as requested
 

DX-313 Safety Har​ness-Fully body safety harness


Hangzhou Wristrong Industry Co.,Ltd started to produce Full body safety harness and its accessories
for 6 years ago, when our partner in Taiwan joined us to develop the high quality safety harness for
Taiwan and international market. All of our safety harnesses are produced 100% according to Europe
EN361:358 2002 and Taiwan CNS, 
as well as EN 354 Safety Lanyard, EN 355 Energy Absorber, EN 362
connector,etc.

All of our webbing belts for safety harness are produced and quality checked by ourselves in house;
most of hardware are supplied from our
 
Taiwan partner, which gurrantee the quality and stablity.

 

DX-313 3-point Full Body Safety Harness with aluminum alloy hardware and double
colors Specification:
Aluminum alloy buckle on the chest belt and thigh belts for fast release.
All the hardware in this set are CE certified and aluminum alloy ,
the upper and lower are different colors, easy to put on

 

Webbing Material                    

1500D Polyester Yarn           

Webbing Width

45mm-50mm

Colors

Orange/Yellow

Size

Universal

Hardware Material

Aluminum alloy

Load Capacity

150kgs/350lb

Tensile Strength

2230kgs/5000lb

Chest belts

Adjustable, by aluminum alloy snap buckle ,fast release,easy to handle

Dorsal belts

Fixed with one aluminum alloy ID-RING-CE certified

Shoulder belts

Adjustable, by one aluminum alloy buckle and ID-RING attached on each side;

Thigh belts

Adjustable, by one aluminum alloy snap buckle attached on each side

Seat belts

Special designed shape to make workers falling into sitting position , ease the Pressure on limbs

Waist Belts

None

Waist Strap Buckles

None

Application

Construction, confined space, electrician height tower working

Standard

CE PSB EN361 CNS

Feature

All hardware are Aluminum alloy,light weighted, easy and fast to handle,economic price with superior quality



Specified Photos for the DX-313 3-Point Full body safety harness


 

 

Different Models of Full Body Safety Harness and safety belts available 



Lanyards and Energy absorbers avaialbe for full body safety harness



DIFFERENT HARDWARE AVAILABLE FOR THE FULL BODY SAFETY HARNESS



Use Instruction-DX-313 Full Body Harness-According to EN361:2002


The product is designed with three Aluminium alloy attachments to minimize the risk of/provide
protection against falling and the dangers resulting from falling down. 

However, always remember that no item of PPE can provide full protection and care
must always be taken while carrying out the risk-relation activity.
 
FITTING AND SIZING – 
safety harness indication
1. Fit your leg into the leg strap
2. The hands should be put through the strap.
3. Adjust leg strap, shoulder strap to achieve comfortable tension.
4. When standing upright, the safety belt should be comfortable, without undue pressure on waist.
5. Only wear products of a suitable size; products which are either too loose or too tight will
restrict movement and will not provide the optimum level of protection. 
 
PERFORMANCE AND LIMITATIONS OF USE
These products have been tested in accordance with EN361:2001 FULL BODY HARNESS and have
achieved the required performance according to EN standard.
Never use the full body harness around structures that are of small diameter or that have small or
sharp edge.
Keep away from chemical reagents to avoid damage. 
The anchorage point should conform to EN795, be chosen so as to avoid collision with other objects
in the event of a fall, and if possible, to be positioned above the user; Do not use an anchorage
point that will not take a shock load of min 1000KG.
Do not anchor with attachment point to a structure that can fall itself. For instance: window
cleaner’s cradle free standing ladder or other loose structures.
The equipment shall not be used outside its limitations, or for any purpose other than its
intended use. These devices are personal issue items.
 
WARNING:IT IS ESSENTIAL FOR SAFETY THAT THE ANCHOR DEVICE OR POINT
SHOULD ALWAYS BE POSITIONED,AND THE WORK CARRIED OUT IN SUCH A WAY
TO MINIMISE BOTH THE POTENTIAL FALLS OR FALL DISTANCE 
 
WARNING: If any problems are discovered that the equipment should be withdrawn
from use immediately ant not used again until confirmed in writing by a competent
person.
 
In order to avoid collision with the structure or the ground, in the event of a fall, depends on the
total fall arrest system used i.e. harness, lanyard and couplings. Users must read the user
instructions for all the components of the system before use. 
WARNING: WHEN THE DEVICE IS USED FOR FALL ARREST SYSTEM, IT IS EFFESSITAL
FOR SAFETY TO VERIFY THE FREE SPACE REQUIRED BENEATH THE USER AT THE
WORKPLACE BEFORE OCCASION OF USE, SO THAT IN THE CASE OF FALL, THERE WILL
BE NO COLLISION WITH THE GROUND OR OTHER OBSATACLE IN THE FALL PATH.
 
Trained User
The equipment should not be used again until confirmed in writing by a competent person that it
is acceptable to do so. 
And the user should be free from any medical conditions that could affect the safe usage of the
equipment.
 
WARNING
CARELESS OR IMPROPER USE OF THIS EQUIPMENT CAN RESULT IN SERIOUS INJURY
OR DEATH.
 
RESCUE
Before and during use, consideration should be given as to how any rescue could be safely and
efficiently carried out.
 
STORAGE AND TRANSPORT 
When not in use, store the product in a well-ventilated area away from extremes of temperature.
Never place heavy items on top of it. If possible, avoid excessive folding and preferably store it
hanging vertically. If the product is wet, allow it to dry fully before placing it into storage.
For transporting the safety belt, it should be packed in a textile bag of suitable size and not
together with any sharp edged tools
 
REPAIR & REPLACE  
The equipment should not be altered and that any repairs must be carried out inline with the
manufacturer’s instructions.